RECOM’s protector monitors four device power branches separately
RECOM’s RACPRO1-4SP/BS electronic protector monitors four separate 24-volt power branches. If a connected motor draws excessive current, it can disconnect that branch so the fault need not shut down the other loads, provided the supply remains adequate. The product has been announced, but its manufacturer page still lists availability as “Coming Soon.”

A slim rail-mounted protector feeds four loads; the motor branch is disconnected while three others remain active.
View full-size imageContaining a fault in one load
A single supply may power a motor, indicator and several other parts of a device. If one fails and draws excessive current, it can disrupt the others. Current is the flow of electric charge; each branch must suit the load connected to it.
The RACPRO1-4SP/BS has four separately protected outputs. RECOM says each output can have its own current limit so that a fault disconnects the affected branch. One faulty load therefore need not switch off the entire device.
Four outputs still share a supply
The slim model is 22 mm wide and is intended for 24 V power distribution. Listed versions permit up to 5 or 10 amperes per output. These are output limits, not a promise that the upstream supply can deliver that much to every load.
For example, separate protection cannot solve a shortage when the combined loads demand more than the supply can deliver. The protector includes a shutdown priority order so important branches can remain powered for longer during an overall overload.
Announcement and availability
RECOM described the model in its 4 November announcement. The product page still showed “Coming Soon” when checked, so an announcement does not establish immediate stock.